As a customized version of the modular TU Screw Conveyor System, ES Screw Conveyors are manufactured in carbon steel with a suitable surface finishing and powder coating. They are made up from a tubular trough that is equipped with at least one inlet and outlet spout, a welded flange at each tube end, helicoid screw flighting welded on a centre pipe with a coupling bush at each end, two end bearing assemblies complete with self-adjusting shaft sealing unit (one of the bearing assemblies incorporated in the drive unit), a number of intermediate hanger bearings depending on the overall length of the screw conveyor. Furthermore, ES Screw Conveyors are equipped with a gear motor that suits the application.

ES Screw Conveyors are of the medium-heavy-duty type.

WAMECO® Dust Collectors consist of a cylindrical shape stainless steel casing with tube clamp connection, vertically inserted filter elements, and an automatic reverse air jet cleaning system. WAMECO® Dust Collectors are either built in for venting applications or come as a stand-alone unit with dust collecting hopper. For suction applications fan versions are available.

The WAMECO® Front Dust Collector version, which has elements that can be unscrewed from the dirty side, is used where access to the filter elements from the clean air side is not possible either because of limited headroom or a top-mounted fan.

WAMFLO® Dust Collectors are equipped with a cylindrical shape stainless steel body with flanged connection that contains vertically mounted POLYPLEAT® filter elements. The air jet cleaning system is integrated in the top cover.
WAMFLO® Dust Collectors are available with or without suction fan.

SILOTOP® is a cylindrically shaped dust collector for venting of pneumatically filled silos. The stainless steel body contains vertically mounted, POLYPLEAT® filter elements. The air jet cleaning system is integrated in the hinged weather protection cover.

HOPPERJET® is a small footprint venting filter for installation on intermediate storage hoppers or weigh hoppers.

VFS Butterfly Valves consist of two high-pressure die-cast semi-bodies manufactured from aluminium alloy, a swivel disc in SINT® polymer composite or cast iron, and a pre-stressed elastomer seal.
For the food industry a version with stainless steel disc and an FDA-approved integral seal is available.
While V1FS has a top flange and a beaded bottom section suitable for the attachment of a flexible sleeve, the V2FS comes with an identical top and bottom flange.

The VFF Silo Discharge Butterfly Valve is manufactured from a single-piece fabricated carbon steel body lined with WAM®'s polymer composite SINT®. Due to the four corner slots the integrated upper square flange shown in the top left photograph can be adapted to different sizes of silo outlet flanges. The valve disc is manufactured from surface-treated carbon steel.

The BA Bin Activator is a device of tapered conical shape that due to vibration facilitates material flow from hoppers or silos. It consists of a seamless carbon or stainless steel cone manufactured on a sheet metal lathe, a seamless SINT® engineering polymer seal with integrated upper and lower flange, suspensions for connection of the Bin Activator with the silo, as well as one or two electric vibrators.

ILT-type Bin Level Indicators have been designed for electric signalling by rotary action of minimum or maximum material level inside bins, hoppers or silos.

ILV-type Bin Level Indicators have been designed for electric signalling by vibration of a fork of minimum or maximum material level inside bins, hoppers or silos.

The IPE-type Electronic Pressure Meter consists of a self-cleaning wear and temperature-resistant membrane, a body manufactured in aluminium alloy, an electronic card and assembly fittings (bolts and gasket).

The KCS Silo Safety System for the safeguarding of silos consists of a central electronic monitoring and control unit which manages a series of silos and a component kit including, in the basic version one power panel for each silo, a silo pipe connection, a pinch valve, a tanker coupling with the filling pipe, a maximum level indicator, a differential pressure switch or electronic pressure meter, a pressure gauge for the venting filter, a pressure relief valve, and an audible alarm.

VCP Pressure Relief Valves consist of a cylindrical casing with clamped weld-on spigot, a disc shape inner steel lid for negative pressure operation held in position by a central spring rod, an outside steel ring for excess pressure kept in position by three spring rods, gaskets, and a weather protection cover.

The body of the VM Pinch Valve is manufactured in aluminium alloy. The sleeves are made from fabric-reinforced material. The sleeve support bushes are either made from aluminium alloy, hardened carbon steel, or 304/316 stainless steel.

The range of MVE-type External Electric Vibrators is the result of more than forty years of experience in vibrating technology for the building industry as well as for other industrial applications worldwide. OLI® Rotary Vibrators afford a guarantee of long term durability, reflecting the care taken over selection of components (well sized SKF bearings) and the high level of precision adopted in manufacture, whilst maintenance is minimal and simple in the extreme.

The F-series Linear Piston Vibrators are particularly suitable for conveying, compacting and detaching of bulk solids due to perfectly linear vibrations. They reach optimum results in emptying of bins or as drives for vibrating conveyors or feeders.

Due to the semi-convex shape of the durable polymer I100 Aeration Pads, air is given off at a wide emission angle across the entire white surface. For sizing, positioning and determination of the number of pads refer to the data sheet.

U025 Aeration Nozzles can be easily fitted on bins or silos from outside which makes them particularly suitable for retrofitting or in cases where the inside of a bin cannot be accessed. For sizing, layout and number of nozzles refer to the relevant data sheet.

WETMIX® V05 is a continuous modular building site mixer for dry premixed mortar which can be easily handled by one person only. The mixer is gravity flood-fed by a silo or hopper.
Instead of a tubular carbon steel casing (see chapter on WETMIX®), with this model, the SINT® engineering polymer mixing chamber is externally supported by four carbon steel bars which makes the complete mixer lighter and easier to handle.